-
Details
The 24C series enclosure handles up to a 44mm x 30mm cross-section inline camera. It will also accommodate ringlights up to 55mm in diameter. It is especially useful for robot applications, and is small & light enough to be mounted on the arm or end effector. The enclosure provides tool-less access to the camera & lens, and comes standard with a PG21 drillable cord grip.
-
Details
The 25R enclosure is a compact, high performance enclosure for a small camera. It is constructed completely of 316 stainless steel for maximum corrosion resistance. The 25R enclosure is provided with two IP68 rated cord grips capable of handling cable diameters of 3mm to 7mm. Cord grips capable of handling 5mm to 10mm are also available at no extra cost.
-
Details
The 32C series enclosure was developed for cameras of up to 50mm x 50mm. It will also accommodate lenses up to 74mm in diameter. It is especially useful for robot applications, and is small & light enough to be mounted on the arm or end effector. The enclosure comes standard with a clear hardcote anodized finish, and can be supplied in a variety of colors and finishes.
-
Details
The 38D enclosure is a lower cost stainless steel & aluminum housing for larger inline cameras. It is designed to protect a camera from impacts, dust, dirt, splashed water and idle hands. The enclosure is highly configurable, with air cooling and air curtain faceplate options. The gland allows passage of one or more premade cables without removal of the connectors from the cables.
-
Details
Designed for FDA regulated washdown applications, the 38S is another simple yet effective design of 316 stainless steel. This competitively priced housing includes a drillable cord grip, allowing use of premade cables. Captive screws hold the cover in place, and when the cover is removed, the user has outstanding camera access. Optional Pan and Tilt mount is also available.
-
Details
The 42D enclosure is a lower cost stainless steel & aluminum housing for the Cognex DataMan 500 or Cognex DataMan 300 camera. It is designed to protect these cameras from impacts, dust, dirt, splashed water and idle hands. The enclosure is designed so that once the enclosure cover is removed, the user has full access to the camera & lens, taking the guesswork out of changing focus and f-stop settings.
-
Details
The 42S enclosure is a 316 stainless steel housing for the Cognex DataMan 500 or Cognex DataMan 300 cameras. Designed to work in highly corrosive environments, it also is designed to work in food applications, with care taken to reduce pockets where water might sit. The enclosure is highly configurable, with air cooling and air curtain faceplate options.
-
Details
APG’s 47C replaces the 45C. It has similar dimensions, but has been reworked to improve fit and finish. The 47C enclosure is designed to make mounting, aiming and servicing a camera as simple as possible. The 47C enclosure can handle a variety of larger body cameras, cameras with larger lenses, and cameras with ringlights. The enclosure is available in a variety of barrel lengths from 6″ to 13″.
-
Details
The AV Series lighting enclosure is a 316 stainless steel housing with an abrasion resistant polycarbonate face allowing a large area of illumination. Designed for food applications care has been taken to eliminate places where moisture may accumulate. The 16 gauge body also provides impact resistance providing a lighting fixture that can withstand the rigors of an extreme industrial environment.
-
Details
The C2/C3 explosion proof enclosure offers compliance with NEC Class I, Groups B, C and D and Class II, Groups E, F and G. The enclosure is also NEMA 4X rated. The C2 Series is designed for small inline cameras like the Keyence CV020, Cognex CDC2/C300, Sony XC Series, and the Basler 601 series. The C3 Series will accommodate larger diameter cameras and ringlights.
-
Details
The C4 explosion proof enclosure offers compliance with NEC Class I, Groups B, C and D and Class II, Groups E, F and G. The enclosure is also NEMA 4X rated, constructed of copper free aluminum. The C4 is designed for longer inline camera/lens combinations. It will accommodate a camera cross-section of 62mm width x 46mm height, and a lens diameter of up to 96mm.
-
Details
The L1 enclosure is a low cost, 304 stainless steel housing for a vertical style camera. It keeps out dust, dirt and idle hands, as well as providing a high degree of impact resistance. The drillable PG29 cable gland on the back allows it to be used with most pre-made cables without disassembly and provides a water-tight seal around one or more cables.
Need Help? Call Toll-Free: 1.888.621.4603
© 2016 Cooper Vision Technologies Inc. Legal Disclaimer.