-
Details
Aexeon is a low-cost, full-featured video acquisition board for analog cameras. Aexeon incorporates a digital media processor and on-board frame buffer for reliable capture for the most demanding vision-related application. Aexeon’s video input circuitry digitizes between multiple component, S-Video, or composite video signals in either square pixel or CCIR-601 resolutions.
-
Details
Aexeon LT is a low-profile video acquisition board for standard definition analog cameras. Available in either PCI or PCI Express formats, Aexeon LT incorporates a digital media processor and on-board frame buffer for reliable capture. Aexeon LT supports both composite and S-Video camera inputs and digitizes in either square pixel or CCIR-601 formats.
-
Details
Aexeon Quattro is a low-cost, real-time video acquisition and compression board for applications where multiple video streams are needed. Available in either PCI or PCI Express formats, Aexeon Quattro incorporates a digital media processor and on-board frame buffer for reliable capture for the most demanding application.
-
Details
CoaXPress (CXP) is a simple, yet powerful, standard for moving high speed serial data from a camera to a frame grabber. Video is captured at speeds of up to 6.25 Gigabits/Second (Gb/S). Control commands and triggers can be sent simultaneously to the camera at rates of 20 Mb/S (with a trigger accuracy of +/- 2 nanoseconds). Up to 13 W of power can also supplied to the camera. All this happens over a single piece of industry standard 75 Ohm coaxial cable.
-
Details
The Axion-CL has been designed to work with all of the popular high speed Camera Link cameras. It’s been design to handle all of the 80-bit cameras currently on the market. In fact it can acquire from two 80bit/85 MHz cameras simultaneously. Of course, all base/medium/full Camera Link cameras are supported.The Axion-CL also benefits from other products in BitFlow’s line up. The Axion-CL uses the Cyton-CXP’s backend: the StreamSync DMA engine and buffer manager, as well as a brand new PCIe Gen 2 interface, with DMA optimized for modern (fully loaded, fully busy) computers.
-
Details
The Axion-CL has been designed to work with all of the popular high speed Camera Link cameras. It’s been design to handle all of the 80-bit cameras currently on the market. In fact it can acquire from two 80bit/85 MHz cameras simultaneously. Of course, all base/medium/full Camera Link cameras are supported.The Axion-CL also benefits from other products in BitFlow’s line up. The Axion-CL uses the Cyton-CXP’s backend: the StreamSync DMA engine and buffer manager, as well as a brand new PCIe Gen 2 interface, with DMA optimized for modern (fully loaded, fully busy) computers.
-
Details
The Cyton-CXP2 can be configured in many different ways. It can acquire a dual CXP-6 camera (total data rate: 12.5 Gb/S), or two single link CXP-6 cameras. When acquiring from multiple cameras, each camera is attached to its own virtual frame grabber. This allows independent acquisition and control of each camera.
-
Details
The Cyton-CXP4 can be configured in many different ways. It can acquire from one quad CXP-6 camera (total data rate: 25 Gb/S) , or four single link CXP-6 cameras, or anything in between. When acquiring from multiple cameras, each camera is attached to its own virtual frame grabber. This allows independent acquisition and control of each camera.
-
Details
Pleoras iPORT Analog-Pro External Frame Grabbers allow system manufacturers and integrators to treat analog cameras as native GigE Vision® cameras. With these external frame grabbers, analog cameras enjoy the long-distance reach of Gigabit Ethernet (GigE) for both video and remote control, and can be mixed with native GigE Vision cameras in networked environments.
-
Details
Pleoras iPORT CL-Ten External Frame Grabbers use a high-performance GigE Vision® 2.0 over 10 Gigabit Ethernet link to transmit video simultaneously from two Camera Link Base or Medium cameras at their maximum data rates, with low, predictable latency. These external frame grabbers allow designers to extend and aggregate system cabling, and integrate Camera Link cameras into a network.
-
Details
The iPORT NTx-GigE Embedded Video Interface hardware helps manufacturers shorten time-to-market, reduce risk, and lower costs by providing a straightforward way to integrate GigE Vision 2.0 video connectivity into cameras, x-ray detector panels, and imaging systems. The NTx-GigE Embedded Video Interface interacts with Pleoras other products in networked or point-to-point digital video systems.
Need Help? Call Toll-Free: 1.888.621.4603
© 2016 Cooper Vision Technologies Inc. Legal Disclaimer.