-
Details
The 22C series enclosure was developed specifically for today’s 30mm x 30mm cross-section miniature inline cameras. It will also accommodate lenses up to 48mm in diameter. It is especially useful for robot applications, and is small & light enough to be mounted on the arm or end effector. The enclosure provides tool-less access to the camera & lens, and is available with either a standard PG16 drillable cord grip, or a bulkhead cable fitting for quick disconnect.
-
Details
The 24C series enclosure handles up to a 44mm x 30mm cross-section inline camera. It will also accommodate ringlights up to 55mm in diameter. It is especially useful for robot applications, and is small & light enough to be mounted on the arm or end effector. The enclosure provides tool-less access to the camera & lens, and comes standard with a PG21 drillable cord grip.
-
Details
The 25R enclosure is a compact, high performance enclosure for a small camera. It is constructed completely of 316 stainless steel for maximum corrosion resistance. The 25R enclosure is provided with two IP68 rated cord grips capable of handling cable diameters of 3mm to 7mm. Cord grips capable of handling 5mm to 10mm are also available at no extra cost.
-
Details
Machine Vision Camera Enclosure IP67 Nano Series
-
Details
The 30D enclosure is a lower cost stainless steel & aluminum housing for your inline style camera. It is designed to protect your camera from impacts, dust, dirt, splashed water and idle hands. The enclosure is highly configurable, with air cooling and air curtain faceplate options.
-
Details
The 30S enclosure is a 316 stainless steel housing for your smaller inline style camera. Designed to work in highly corrosive environments, it also is designed to work in food applications, with care taken to reduce pockets where water might sit. The enclosure is highly configurable, with air cooling and air curtain face plate options.
-
Details
The 32C series enclosure was developed for cameras of up to 50mm x 50mm. It will also accommodate lenses up to 74mm in diameter. It is especially useful for robot applications, and is small & light enough to be mounted on the arm or end effector. The enclosure comes standard with a clear hardcote anodized finish, and can be supplied in a variety of colors and finishes.
-
Details
The 35C enclosure is designed to make mounting, aiming and servicing your camera as simple as possible. The cable gland on the back allows you to use most pre-made cables without disassembly and provides a water-tight seal around one or more cables.
-
Details
The 38D enclosure is a lower cost stainless steel & aluminum housing for larger inline cameras. It is designed to protect a camera from impacts, dust, dirt, splashed water and idle hands. The enclosure is highly configurable, with air cooling and air curtain faceplate options. The gland allows passage of one or more premade cables without removal of the connectors from the cables.
-
Details
Designed for FDA regulated washdown applications, the 38S is another simple yet effective design of 316 stainless steel. This competitively priced housing includes a drillable cord grip, allowing use of premade cables. Captive screws hold the cover in place, and when the cover is removed, the user has outstanding camera access. Optional Pan and Tilt mount is also available.
Need Help? Call Toll-Free: 1.888.621.4603
© 2016 Cooper Vision Technologies Inc. Legal Disclaimer.