Shop

The camera from the CamPerform-CP series  integrates the LUX160 sensor offering a very high resolution of 16 MPixel. Up to 148 frames/sec at full resolution can be captured.

The CP90-3-M/C-540 camera is equipped with a 3 megapixel LUPA3000 monochrome or colour On-Semi image sensor. Its outstanding feature, in addition to the high image rate in global shutter mode, is the speed increase in the X and Y orientation, which makes the sensor particularly well suited for high speeds above 10,000 images per second.

The CR600x2 is the Optronis slow-motion camera of CamRecrod series with the highest light sensitivity, at up to 12,000 ISO/ASA. Fast movements are reliably recorded with exposure times of as little as one (1) microsecond (1 millionth of a second). The camera takes 500 images per second at full resolution (1,280 x 1,024 pixels), although the resolution can be freely configured in the X and Y orientation. Lowering the resolution increases the image refresh rate or, if the image refresh rate is kept the same, extends the recording period. Typical applications are in the range from 50 to 10,000 images per second. The camera housing is free from ventilation slots.

Cyclone-16-300 provides high spatial resolution of 16 MPixel and allows to capture images at about 300 frames/sec. The machine vision camera is part of Optronis’ CamPerform-Cyclone series and integrates the LUX160 sensor. This sensor is operating in global shutter mode and provides low noise image data. A monochrome as well as color version is available. Frame rate can be increased by reducing height of image area.